- Separate Controls for Wash deck and/or vacuum
- Dual vacuum ports
Flip-up deck
On-board wand holder
Teejet strainer for clean water
Discharge fittings on the Swirly Surface Cleaner
50” Ride-on Surface Cleaner with Water Recovery
For commercial-scale pressure washing, the Swirly tractor-mounted surface cleaner is a key asset for fleet supervisors, public utility companies, property maintenance managers, and city park teams who are passionate about efficiency and cleanliness.
The stainless steel cleaning deck mounts to the front of a Ventrac or Steiner tractor, and the combined 300-gallon dual water tanks ride the trailer for even weight distribution and low clearance. Each pass will clean a 50″ swath. Either recover your dirty water into the second tank, or use both tanks for clean water and spray the dirty water into the lawn. Clean up the edges with the on-board pressure washing wand.
The Swirly saves 70% labor on average. One person and one machine can do it all. When you’re finished washing, detach the Swirly and use your tractor for mowing or snow removal. You’re gonna love it.
- 50” cleaning path
- Environmentally friendly water recovery
- Stainless steel deck
- Wand included for hard to reach surfaces
- High-efficiency vacuum system
- Disinfectant option for serious cleaning
- Powerful filtration system option
- Fits low-clearance areas
- Light and even weight distribution
- Output pressure control
- 10 gpm at full throttle
- Easy to maneuver
- Non-marking wheels
- Dual water tanks for a combined 300-gallon capacity. Use in various ways:
- Spray from 1 clean-water tank. Vacuum into 1 dirty-water tank.
- 300 gallons of clean water without recovery.
- 300 gallons of flood water cleanup with filtration system.
Distance from nozzle tip to surface: 1.92”
Tip size: 2.0 orifice at 25 degree fan pattern
Operating pressure: Variable output, max 2000 psi for track
Width: 50.63”
Depth: 25.86”
Hose length for gun: 25′
Front wheel: 8” Cushioned-load, non-mark gray rubber
Rear wheel: 4” Cushioned-load, non-mark gray rubber
Surface Seal strip: 1” Super-seal horsehair bristles
Surface Seal strip deflection: 15%
Pump Oil Capacity: 32 oz (10w30 non-detergent pump oil)
You will receive a five year warranty on the stainless steel deck. You also will receive a five year pump warranty as specified by the manufacturer. (AR Cam shaft pumps are warranted for a period of five years to the original purchaser.) We offer a one year warranty on our hoses and all other non-consumable items. Consumables are considered nozzles, pump seals, gun hoses, etc.
- Pump oil must be changed after the “break-in” period of the first 20 hours of run time. Approximately every 500 hrs following.
- Do not run pump dry as this will damage high pressure seals.
- Do not allow the unit to freeze without displacing water with air or RV antifreeze.
- Do not operate the PTO of the ventrac with the deck lifted more than 4” from surface.
Questions? Ready to order?
Call (540) 879-2180 or send us a message.
Swirly Distributor
3262 Limestone Lane
Dayton, VA 22821